39 paddle faces under a 4K microscope.
We photograph every paddle's surface up close, match it to the brand's own name for its grit, and track how it wears after real play.
How we test
Three lenses
Elikliv 4K digital microscope. W: whole area. L: about 10 to 20 weave squares across. M: about 5 to 7 squares across, the standard lens for the collection.
Surface ID
Every surface is photographed, then matched to the brand's own published name for its grit, so labels reflect what the brand calls it.
Wear against the throat
The throat barely touches the ball, so it shows what the grit looked like new. We compare hitting zones to it at the same zoom and light, and judge only sharp frames from a full-face video scan.
What we've noticed so far: larger, coarser grit tends to feel sticky, while finer grit tends to feel softer and plusher. Big raised crystals take every hit directly, so they dull and chip fastest. Fine grit set inside the coating wears by slow polishing instead.
The grit collection
39 paddles under the M lens. Surface names are as published by each brand.
Each paddle up close

Green silicon carbide

#2 RPM JadeSICmatrix surface

#3 MARK unMARKed 2026VelosiGrit

HexGrit

TrueGrit coating

PermaGritNano

#7 Zcebra GazelleFrosted carbon

#8 Luzz Inferno2Aero-Black silicon carbide

Teflonix layer

Embedded carborundum

#11 VANWIN Alpha Control100% Kevlar face

EverGrit

Crystal Blue Endurance grit

CarbonSkyn

#15 E6 IgnisEmbedded grit

Tacky surface

Resin-based peel-ply

#18 Luzz Glider 2026984-Aero grit

Durable grit (unnamed)

±45° T700 carbon

#21 Proton Project CoyoteRoughness-enhanced surface

Coarse peel-ply

#23 Holbrook Fuze VantaGritVantaGrit

3D carbon fiber

#25 Mehau S5Fluid Surface

3D woven carbon

#27 Selkirk LABS Project BoomstikInfiniGrit

Carbon Friction Surface

#29 CPX Hyper+Raw T700 carbon

Enduro MaXx Grit

Carbon surface

SpinLock silicon carbide

MagmaGrit

Space Dust Grit

GritBite surface

HexGrit (licensed from 11SIX24)

T800 carbon, peel-ply texture

#38 RPM Friction Pro V2CarbonBite surface

Carbon fiber reinforced, micro-sanding finish
Newest additions
Arronax Boost-1
Green hexagonal flakes set into a frosted T700 carbon weave, with fine raised grit points between them. Arronax calls it a GRITBITE surface on the BOOST-1 QuickSand but doesn't say what GritBite is made of. The hex flakes look decorative; the weave texture and raised grit appear to do the gripping. That's a visual read and hasn't been spin-tested.
Volair CMD
Volair licensed 11SIX24's HexGrit. Under matched light, a brand-new CMD shows the same kind of glassy, beaded layer with fine sparkle as the 11SIX24 HexGrit. The weave looked slightly crisper under the Volair's layer, which could be focus or the spot photographed.
Arronax KVL 005
Tight, even plain weave with a matte peel-ply texture over T800 carbon. This is not the durable-grit version. A published spec lists its roughness at 6.58 µm Ra.
RPM Friction Pro V2
Crisp plain carbon weave with a dark, glossy finish. The texture comes from the carbon surface itself, not added grit.
Li-Ning HyperPower 90S (14mm)
The paddle is labeled "carbon fiber reinforced, micro-sanding finish." Under the microscope, frosted, finely scratched tows give the texture, with no grit particles on top.








Arronax Boost-1, more angles
Wear studies
Conservative visual estimates, about ±10 points. Each paddle is compared with its own throat under matched light.
| Paddle | Use | Result |
|---|---|---|
| RPM Jade (SICmatrix) | Played | About 5–15% visible wear. Both faces' centers look close to the throat: light polishing and scuffs, no chips, bald spots or missing grit. Fine grit sits inside the coating and polishes down slowly. |
| PACT Teflon Evolve (Teflonix) | Played | About 5–10% visible wear at the center versus the throat. Shot under matched light. |
| 11SIX24 HexGrit Power 2 | About 4–5 months | Center about 25–35% wear. The thick sparkle layer wore through to the carbon in the hitting zone. |
| Honolulu J6CR (Crystal Blue) | About 4 months | Center about 15–25% wear. |
| Evolv (CarbonSkyn) | New, 1 month, 6 months | Same model photographed at three ages. Throat, center, top, and 1 inch above and below center, plus a comparison against the HexGrit Power 2. |
Head-to-head surface comparisons
Bread & Butter LOCO 2 (Space Dust) vs 11SIX24 HexGrit
A close cousin of HexGrit, but with larger, more raised beads. L and M lenses, matched light.
Volair CMD vs 11SIX24 HexGrit
The same kind of HexGrit surface. L and M lenses, matched light.
Evolv vs 11SIX24 HexGrit Power 2
A used-paddle wear comparison.
RPM Jade (SICmatrix) vs RPM Friction Pro V2 (CarbonBite)
The same brand with two approaches. The Jade has fine grit in the coating, while the V2 gets its texture from the carbon face itself. L and M lenses, matched light.
Grit Pickleball E1 CW vs E1 TW
The same tight plain carbon weave. The TW adds titanium strands woven through in a grid every few squares; the CW is a uniform dark weave under a thin glossy coat.





Grit E1 CW · L and M lenses Not USAP approved
Grit E1 TW · L and M lenses Not USAP approvedGrit E1 CW and E1 TW are recreational-play paddles that are not USA Pickleball approved.







